Before you buy

• Honeywell T6 Pro Wifi Setup
• Programming Honeywell T6 Pro Thermostat
• Honeywell T6 Pro Thermostat Troubleshooting
• Honeywell T6 Pro Wifi User Manual

Honeywell TH6320U2008 - T6 Pro Programmable Thermostat, 3H/2C Heat Pump, 2H/2C Conventional - The T Series programmable thermostat streamlines everything from product selection and installation to customer service and support.

No. Honeywell Connected Thermostats are designed to be accessed remotely via Apple or Android mobile devices only.

1. User manual instruction guide for Honeywell devices. Honeywell User Manuals Honeywell International Inc. MRCH2 User Manual20190304v1 - LANCER CONTROLLER EXHIBIT 7-1 Install Guide 33-00446EFS01 - T6 PRO Z-Wave Thermostat: 2019-09-16. 8DL6280ZW Users Manual User Revised 800-10301-Aug6280WiFi: 2012-08-07: 8DLZWM Users Manual Full.
2. Honeywell Lyric T6 Pro Wi-Fi Manuals & User Guides. User Manuals, Guides and Specifications for your Honeywell Lyric T6 Pro Wi-Fi Thermostat. Database contains 5 Honeywell Lyric T6 Pro Wi-Fi Manuals (available for free online viewing or downloading in PDF): Operation & user’s manual, Professional install manual, Installation instructions manual, Getting started.
3. Nov 19, 2019  Find many great new & used options and get the best deals for Honeywell Lyric T6 Pro Wi-Fi Programmable Thermostat - White at the best online prices at eBay! Free shipping for many products!

Yes, the Honeywell Home app supports multi zoning using T6 Smart Thermostats.

Honeywell's Connected Thermostats use Honeywell's proprietary communication protocol that work on the 868Mhz band. This should not interfere with any other wireless devices.

The T6 thermostat is a wired device and requires wall mounting.

The T6R and T6R-HW thermostat are wireless devices and are supplied on a fixed table stand.

At this time Windows Phone support is not available for the Honeywell Thermostat family.

The T6 Smart Thermostat is suitable for most wet heating systems including combination and system Boilers either gas or oil fired. It can also be used as part of S-plan and Y-plan system.

Yes, your thermostat will keep working with the schedule it has stored in its memory.

However you will not be able to remotely control your heating system until an internet connection is restored.

The T6 wireless receiver can be used with on/off boilers and it has OpenTherm capabilities offering boiler modulation. Some boilers with modulation functions have restrictions on what connections will work and therefore we recommend contacting the boiler manufacturer.

If the message 'thermostat is offline' is displayed please perform the steps below:
1. Log out of the Honeywell Home App and then log back in.
2. Remove the thermostat's face plate from the wall for about 30 seconds.
3. Place the T6 Thermostat back on the wall.
4. Check the Honeywell Home App to see if the thermostat has reconnected to the Wi-Fi network.
5. Make sure the Wi-Fi router is powered on, and broadcasting a network signal.
6. Unplug the router for 30 seconds.
7. Perform a Wi-Fi reset.
8. Remove the thermostat from the location and then re-add the device.
9. Perform a 'Factory Reset.'.

You can find more support in our Support Articles Centre.

Set up and connection

You can connect to your T6 Thermostat by downloading the Honeywell Home app for your iOS or Android device. Then create your account and follow the on screen prompts.

In order to setup the device when the 'Device Telemetry' error appears:

1. Delete cache
2. Factory reset the device
3. Reinstall the device on the app

In order to solve a finalizing error of T6 thermostat registration:

1. Delete the location from the Honeywell Home application.
2. Uninstall the Honeywell Home app.
3. Restore the thermostat to the factory settings.
4. Install the Honeywell Home application and login to create the location again.

In order to check a firmware on the T6 Thermostat follow the steps below:

1. Press the MAIN MENU button.
2. Go to DEVICE INFO using left and right arrows.
3. Press the tick.
4. Go to FIRMWARE using left and right arrows.

The firmware number will be displayed below.

For the T6 wired:
Take the unit off from the wall and turn it around, on the back there should be a red sticker showing the MAC.

For the T6R wireless:
Lift the unit up and turn it around. There should be a red sticker on it showing the MAC.

In order to obtain the MAC ID on the display follow the below steps:

1. Press the menu bsymbol to access the menu
2. Go to DEVICE INFO using left and right arrows
3. Press the tick
4. Go to MAC ID using left and right arrows

The MAC ID number will be displayed

To set the PIN protection on the T6 Thermostat, please follow the steps below:

1. Click the main menu button
2. Press the right arrow to go to the LOCK menu. In the LOCK menu you can choose among the following options:
   - OFF - no PIN protection
   - PARTIAL - only the temperature can be changed
   - FULL - no access is allowed without a PIN number​
3. Choosing PARTIAL or FULL protection the PIN number will appear on the screen.
   - It is always a sum of 1234 number and the date code of the product. ​
4. ​Confirm the lock type with a tick.
   - ​A partially or fully locked screen will be indicated by a lock symbol at the bottom of the thermostat screen.
5. To UNLOCK, touch a lock symbol. When prompted to enter a PIN number, touch [ + ] or [ - ] to select the first number of the PIN code. Confirm the number with a tick, and repeat for the remaining numbers.

In order to perform a factory reset an a T6 thermostat:

1. Press and hold the menu button until the Advanced menu opens.
2. Go to 'Advanced Reset' using left and right arrows.
3. Press on 'Factory'
4. Press on the tick icon to confirm the rest.

1. Go the main menu in the app

2. Select your thermostat

3. Go to 'Thermostat configuration'

4. Select 'Delete thermostat' and confirm.

All settings are stored in permanent memory so that the thermostat can start working properly as soon as power is restored.

Yes.

1. Go the main menu in the Honeywell Home app.

2. Select your thermostat

3. Select Thermostat configuration

4. Change the thermostat name in the entry box

Yes.

1. Go the main menu in the Honeywell Home app.

2. Select '{location name} details'

3. Select 'Edit Address'

4. Change the Name in the entry box

This is normal and appears because you are connecting to the wireless access point on your thermostat which is not connected to the internet. Select and connect to the thermostat Wi-Fi: A pop up will appear ‘Internet Not Available’, which can be dismissed. When connected to the thermostat Wi-Fi, press ‘BACK’ to return to the app.

You can try the following three options to resolve this:

• Verify that you are using the right Wi-Fi password;
• If using an android device try turning off cellular/mobile data whilst re-registering;
• If you have shared the device’s location with other users, you should first remove the device from their accounts before proceeding.

You can find more support in our Support Articles Centre.

Please refer to this video for guidance on the registration process of a T6/T6R Smart Thermostat in the Honeywell Home App on an iOS device.

Honeywell Home mobile app

Your Lyric app will upgrade to the Honeywell Home app if you have your phone set to update your apps automatically. If you haven’t already, go ahead and set your Lyric app to automatically update. That way you can trust you’ll always have the best in performance, reliability, and peace of mind for your Lyric experience.

For iOS: Open your settings, select iTunes & App Stores, and tap the switch next to Updates. The switch will show green once it's enabled.

For Android: Open the Google Play app, tap Menu to get to your Settings, then select Auto-Update Apps. You can choose to allow updates at any time, or only over Wi-Fi.

1. You need to stop the App by pressing the Home button on the iPhone twice. Close the App by swiping upwards.
2.Restart the app, log on and restart to add the thermostat by pressing the ‘+’ Add Device.

- Check the power to the thermostat.
- Check if the thermostat indicates a Wi-Fi error message or red cross. If so, check on the router if the Wi-Fi is still working.
- Check on the router if the internet is still working.

Your app is still working properly
- Check the power to the thermostat.
- Check if the thermostat indicates a Wi-Fi error message or red cross. If so, check on the router if the Wi-Fi is still working.
- Check on the router if the internet is still working.

Select the right country you are in by pressing the “Change Country” at the bottom of the screen.

The Honeywell Home app connects to the internet so you can control your heating system from anywhere in the world. Additionally, the T6R-HW will allow hot water control. Some of the main features are:

• Remotely view and change your heating system settings (and hot water systems - T6R-HW only).

• It contains a number of programming options that can fit to your lifestyle

• Group scheduling for multiple devices and locations

• Receives alerts and messages (such as High or Low tempertaure alerts, thermostat off-line) through the app and emails.

The Honeywell Honeywell Home app is a free download available for iOS devices at App store or for all Android devices at Google Play .

1.You need to stop the App by pressing the Home button on the iPhone twice. Close the App by swiping upwards.
2.Restart the app, log on and the thermostat should be displayed.

Your thermostat has lost the connection.
Check if your thermostat is still showing Connecting/Configuring.
If not restart the thermostat Wi-Fi by pressing the temperature for 5 sec. on the thermostat and press OK and restart.
If it shows Connected/Configuring, press on the 'X' or on the blank lower right corner of the screen on the thermostat to stop the broadcast/connection.

A communication error occurred between the thermostat and the server.
Press OK and force close the Honeywell Home app completely. Restart the app and log on. If the thermostat does not appear as registered, please try 'Add new device' again.

Check if your thermostat is still showing Connecting/Configuring.
If it shows Connected/Configuring, press on the 'X' or on the blank lower right corner of the screen on the thermostat to stop the broadcast/connection. Now follow the instructions in the app.

If you are still unable to register your device, please delete your location on the app (Location Details - Edit existing address), log-off and uninstall the app. Reinstall the app and start the registration process again.

A communication error occurred between the thermostat and the server.

Press OK and force close the Honeywell Home app completely. Restart the app and log on. If the thermostat does not appear as registered, please try 'Add new device' again.

Check if your thermostat is still showing Connecting/Configuring.
If it shows Connected/Configuring, press on the 'X' or on the blank lower right corner of the screen on the thermostat to stop the broadcast/connection. Now follow the instructions in the App.

If you are still unable to register your device, please delete your location on the app (Location Details - Edit existing address), log-off and uninstall the app. Reinstall the app and start the registration process again.

Please press OK and wait to see if the connection can be established. In case you receive this message again, please ensure you have entered a correct password to your Wi-Fi network.

The T6 thermostat will not work on a 5 Ghz Wifi Network. Please ensure that your router is configured to cover 2.4 Ghz as well.

Where can I find the Honeywell Home App Installation Guide?

If you have forgotten your Honeywell Home account password or would like to reset the password of your Honeywell Home account, select the “Forgot Password” link on the Log In screen of your Honeywell Home app. We will send an email to the email address you used when creating your account that will enable you to reset your password. Simply click the “Reset Password” button in the email and you will be asked to create a new password. This email will be sent from Connected-Home ([email protected]). If you have not received the password reset email after five minutes, please check the Spam folder of your email account. If your activation email went to your Spam folder, please add our email address, [email protected], to your contacts and trusted mail sources as specified by your email client or ISP. If you do not find it in the Spam folder, click on the “Resend” button in the Honeywell Home app and the activation email will be resent. If you still do not receive your activation email, please contact the Lyric Technical Support team at 0300 130 1299 (dial 1 if you are a homeonwer) for help.

You can find more support in our Support Articles Centre.

Using your T6 or T6R Smart Thermostat

When the 'Stand-by' icon is selected the heating will toggle between on and off.

When the [SCHEDULE icon] icon is selected, the thermostat will activate or deactivate scheduling.

Selecting the hot water icon from the main menu on the thermostat display will allow you to schedule your hot water, perform an instant hot water 'boost' or turn your hot water on/off

The Holiday mode can be enabled via the Honeywell Home app. To enable Holiday mode from within your Honeywell Home app go to Menu/Holiday.

Once enabled Holiday mode can be disabled from within the app or by touching your T6 Thermostat screen to resume the schedule.

To update default schedules you can select the schedule button on the Honeywell Home app or go to Schedule in the menu of your Thermostat. The T6R-HW model has the scheduling of hot water in the hot water menu.

The T6 Thermostat allows a maximum of 6 time and temperature profiles per day with the minimum of 5 degrees frost protection. Additionally, the T6R-HW model provides for 3 hot water 'on' periods per day.

No, the T6 Thermostats are designed to work in conjunction with Central Heating systems.

Honeywell takes great care to ensure it is always fully compliant with all relevant European legislation regarding personal data resulting from its products and services.

We fully understand customer concerns about both data privacy and security and can assure customers our products and services are engineered with those considerations in mind.

Full details can be found http://www.honeywell.com/privacy-statement

(For example, Honeywell has been ranked first in the industrial and manufacturing section of Security Magazine’s ‘Security 500’ classification.)

As specified in the attached T6 Prod Spec Sheet V5, Y6H810WF1005 code is the part number for the product in other countries, while Y6H910WF1011 is the part number for the UK market only.

Unregister it from your Honeywell Home account. Do a hard reset of it. Re-run the registration procedure.

You can find more support in our Support Articles Centre.

Smart home integration

The geofencing feature is location-based scheduling which can intelligently override the time-based schedule of your thermostat. If your schedule varies or you regularly depart and return at different times, the Lyric Thermostat can automatically adjust to your life. Geofencing brings you comfort when you’re home and savings when you’re away.

When you enable the Lyric geofence schedule, it intelligently overrides your

fixed program schedule based on whether you are home or away.

• Active geofence schedule is indicated by the 'geofence' logo in the top left corner of the screen. Home/Away status is indicated by the 'house' logo and 'away' logo.

• To learn more about configuring the geofence schedule, see the geofence menu in your Honeywell Home app.

• Geofencing can only be configured using your Honeywell Home app.

• To learn more about how smart geofencing can work for you and how it fits to your busy lifestyle, go to getconnected.honeywell.com

For setting up Geofencing you need to be in the same location as your Lyric thermostat and have the location services (preferably including GPRS) of your phone switched on.

During the registration of your Lyric thermostat within the Honeywell Home app, you will have the option to also configure Geofencing. Please follow the on-screen prompts.

In case of multiple users the last user who is exiting / leaving the Geofencing boundry set up around your home is triggering the Geofencing AWAY setting, while the first user returning is triggering the Geofencing HOME setting.

Yes, your T6/T6R thermostat works with Apple Homekit.

Note: this does not work with Android phones.

To connect your iOS device:

1. Go to the main menu on the thermostat

2. Select your thermostat model

3. Select 'Set up HomeKit and Siri' and follow the on screen prompts.

HomeKit is Apple's connected home technology used to seamlessly integrate and control HomeKit devices in your home from your mobile device. Within our T6 Thermostat, Honeywell has implemented the HomeKit Chip so that this is a certified HomeKit Product.

For more information on HomeKit, please visit Apple's website.

Apple Homekit does not work outside the home unless you have Apple TV as well.

For more information on HomeKit, please visit Apple's website. (http://www.apple.com/ios/homekit/)

Honeywell T6 Pro Wifi Setup

The T6 thermostat communicates with the relay box through an encrypted radio frequency signal.

D3300 manual. Manual Download Agreement. These Download Terms and Conditions ('Agreement') constitute a legal agreement between you (either an individual or single entity) and Nikon Corporation or its associated company ('Nikon') setting forth the terms and conditions governing your download of the operation manual for our products (“Manual”).

The evohome Wi-Fi Controller is not currently using an encrypted radio frequency signal and as a result the thermostat cannot be part of an evohome heating system.

The thermostat cannot be bound to the evohome Wi-Fi Controller nor can it be bound to the BDR91 due to the encrypted radio frequency signal.

In addition, it is not possible to use the Honeywell Home mobile application in order to control the evohome Wi-Fi Controller and it is not possible to use the TCC mobile application in order to control the thermostat.

Both the T6 Smart Thermostat and the evohome smart multi-zone system are compatible with Google Home.

For the latest news, please connect with us on Facebook.

Programming Honeywell T6 Pro Thermostat

In order to configure a Honeywell Home Thermostat to work with Amazon Alexa please check the following steps:

1. Install the Honeywell Home app.
2. Sync the T6 thermostat to work with Honeywell Home.
3. Install Amazon Alexa app.
4. Configure Amazon Alexa app for first time use and make sure is ON.
5. Access the tab “Smart Home” in the Amazon Alexa app.
6. Tap on the link “Your Smart Home Skills” located at the bottom of the page.
7. Tap “Enable Smart Home Skills”.
8. Search for the Honeywell Home app in the search tab on Amazon Alexa app.
9. Tap on the Honeywell Home app once it is found and press “Enable”.
10. A page will pop-up to ask you to login into the Honeywell Home app.
11. App will ask you for permission, press 'Allow'.
12. After you login, all the devices linked to the Honeywell Home app will be displayed.
13. Select the needed ones and press 'Connect'.
14. Close the window as the program requires.
15. Tap 'Discover devices'.
16. Devices selected at step 13. will be displayed in the 'Smart Home' tab.

Honeywell T6 Pro Thermostat Troubleshooting

Honeywell T6 Pro Wifi User Manual

You can find more support in our Support Articles Centre.