1. Art Phono Plus Review
2. Artcessories Usb Phono Plus Manual
3. Art Usb Phono Plus
4. Art Usb Phono Plus V2
5. Art Usb Phono Plus V2 Manual
6. Phono To Usb

Overview. Windows 7 Users – Please read this FAQ. The USBPhonoPlus v2 is the ideal low cost interface solution for transferring any analog or digital audio source, including a turntable into a computer via standard USB connection. Building on the success of the two previous iterations, the ARTcessories DeeJayPre and the USBPhonoPlus, the USBPhonoPlus v2 adds more convenient pre or post. The ART USB Phono Plus is a flexible phono (turntable) preamp with a USB interface and digital connections. The USB Phono Plus is an ideal solution for quality recordings while digitizing old vinyl collections, connecting a turntable to a line input, or as a simple. Art Pro Audio USB Phono Plus owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. INTRODUCTION: The. USB Phono Plus is a high quality USB audio interface with a built-in phono preamp. An interface between your computer and a wide variety of analog and digital sources. Inputs are switchable between Phono and Line level signals and a.

3

INTRODUCTION:

The

USB Phono Plus is a high quality USB audio interface with a built-in phono preamp. It acts as

an interface between your computer and a wide variety of analog and digital sources. The analog

inputs are switchable between Phono and Line level signals and a Low Cut filter removes rumble and

wind noise while leaving the audio pristine. The front Gain Trim control and Signal/Clip LED allow you

to optimize the analog to digital converter for a wide range of input sources. The front panel USB

Monitor/headphone jack and the Optical Output on the rear panel can monitor the audio output from

your computer. The USB Monitor/headphone jack can also provide zero latency monitoring of the

input source for easy cueing of records and tapes. The built-in low noise Phono Preamp circuit is

highly accurate and precisely conforms to the RIAA standard. The Line Out jacks are always con-

nected to the input preamp signal for source monitoring or to allow use as a stand-alone phono

preamp.

Housed in an all aluminum black anodized case, the

USB Phono Plus can be powered by either an

external power source or directly off the USB port, so remote recording is a snap. An Optical

TOSLINK Input and Output as well as an S/PDIF Input let you use the

USB Phono Plus as a digital

audio to USB interface as well.

The

USB Phono Plus is fully compliant with the USB 2.0 specification and uses USB adaptive mode

for playback and USB asynchronous mode for record. It will work with the USB audio device drivers

built into Windows 98SE/ME/2000/XP/Vista/Win7, Linux, and Apple OS9.1/OS-X computers with

It's just as if you paid the whole amount up front! No paperwork. Nektar panorama 61 key user manual.

native USB support. No special drivers are needed. We’ve included a CDROM containing SoundSav-

er Express to get you started!

Key Features Include:

•

USB Connectivity to Desktop and Laptop Computers

•

RIAA Accurate Low Noise Phono Preamp

•

Up to 45 dB of Clean Gain

•

Latency Free Monitoring

•

S/PDIF or optical to USB and USB to Optical Interfaces Included

•

Preamp Line Out Allows Use as a Stand-alone Phono Preamp

•

Includes Recording & Production Software

•

Compact, Stackable all Aluminum Chassis

•

Flexible Power from USB or External Power Supply

•

Three Year Warranty

4

CONNECTIONS:

The

Preamp Phono/Line In connections are RCA-type jacks and are used to connect your turntable,

tape, CD, MP3 player, or other analog stereo audio device to the

USB Phono Plus.

The

Ground terminal connection on the rear is used to connect the separate ground wire from your

turntable to reduce hum. (This connection is unnecessary for digital output turntables).

The

Preamp Line Out connections are RCA-type jacks that are always connected to the analog input

preamp signal for source monitoring or to allow use as a stand-alone phono preamp.

The

S/PDIF In To USB RCA-type connection is a digital input that overrides the Opto In and analog

preamp signal connections whenever there is a valid digital signal present that is in S/PDIF format.

This digital signal input is routed to the your computer USB interface for S/PDIF to USB connectivity

Art Phono Plus Review

only.

Note: You cannot connect S/PDIF to analog or analog to S/PDIF with this product.

The

OPTO In To USB and OPTO Out From USB connections provide for Optical digital connections

direct to your computer via USB. When there is valid TOSLINK digital signal at the

OPTO In connec-

tion it overrides the analog preamp signal connection to the USB interface.

The 1/8-inch Headphone

Monitor Output jack on the front is stereo unbalanced and can accommo-

date a wide variety of headphone models. Maximum output level is +6dBu (1.4Vrms).

The USB bus from your computer normally powers the

USB Phono Plus. A power connector on the

rear allows you to use an optional external power source to reduce the power drawn from your com-

Artcessories Usb Phono Plus Manual

puter. The

USB Phono Plus operates from any external power source that provides 150mA or more

@ 7 Volts to 12 Volts DC (either polarity at the tip will work with our unit) or 9 Volts to 12 Volts AC.

The

USB To Computer connector is USB 2.0 compliant and should be used to connect directly to

Art Usb Phono Plus

one of the USB connections on your computer. This connection also powers the USB circuitry inside

the

USB Phono Plus and will power the whole product if no other power source is available. This

connection looks like a standard “USB Audio CODEC” to your computer, and your computer then

controls the sample rate.

Art Usb Phono Plus V2

Since the USB connection will be carrying high quality digital audio to and from your computer as well

as bus powering the USB interface, we suggest that you use a high quality shielded USB cable for

Art Usb Phono Plus V2 Manual

best performance. Ideally you should connect directly to one of the USB inputs on your computer.

Phono To Usb

Connecting through a shared hub can reduce power and bandwidth that is available for each USB

device and should be avoided when possible. Though the

USB Phono Plus is compatible with both

USB 1.1 and 2.0 standards, USB 2.0 is preferred for the cabling and computer connection as it allows

for more system bandwidth. If you must use a hub, it should be a powered USB 2.0 compliant hub for

best results. This is especially important if you plan on using multiple units for more channels of

simultaneous digital audio input over USB connections.